Our latest product,

The Top Light, is particularly space saving. By designing the flue gas pipe, flow and return as well as the air relief on top of the boiler, it is now possible to place the pellet appliance Top Light closer to the wall than ever before (observe local building control advice) to the wall.

Combining this with a depth of only 480 mm, the appliance is ideally suited to be installed in a unility room, small, large cupboard, boiler house,garage or outhouses. The Top Light is offered with a capacity of 2.4 – 9.2 kW and sports an efficiency rate of 92.2% whilst operating in the important part load mode. The big ashtray means that the ash has to be removed only once or twice a year.


• Regulation with Lambda probe
• Self-cleaning stainless steel burning system (resistant to high temperatures)
• Primary air supply regulated with an air flow sensor
• Secondary air supply regulated with an air flow sensor
• Self-cleaning heat exchanger
• Automatic ignition
• Ashtray with ash compression
• High capacity suction engine for vacuum system
• Pellet storage tank with approx. 30 kg capacity
• Flue gas ventilator with controlled revolutions
• Microprocessor control system with full text display of large dimensions
• Display
• Interface for external commands
With this innovative high-tech pellet boiler, Nuergy - Biotech is opening up a whole new perspectives in the heating technologies with pellets.

With the Top Light pellet boiler you thus have an appliance that combines absolutely cost- efficient heating with high comfort and a small space requirement.


Technical Data:


Power: 2.4 - 9.2 KW

Exhaust pipe connection: Ø 130 mm

Electrical connection: 230 V, 50 Hz

Overall efficiency: 96%


Weight

Dimensions


H1
Boiler height: 1400

H2
Flow height: 1435*

H3
Height of return pipe: 1435*

H4
Flue gas pipe connection height: 1450*

H5
Ventilation height: 1435*

B1
Boiler width: 900

T1
Boiler depth: 480

T2
Overall depth (with control panel): 480


* w/out adjusting feet

---

August 9, 2008